A matched pair for your gun safe: the top rest holds the barrels, the bottom cradle holds the stocks. Start from a standard template or enter your own sizes — everything updates instantly.
Fit to my safe
As in our “How to choose a cradle” guide: measure three distances and we'll do the rest.
Inside safe dimensions (optional)
Base
Under the stocks
Mounting
Several times stronger than vinyl. Reliable in a steel safe.
FD5—
DFD5—
Total—
Drag to rotate
Safe, mm (W × D × H)
Barrel rest · top view (edge y=0 against the wall)Under the stocks · top view
How to measure your safe and guns
Split the guns into scoped and unscoped. Count guns with extra equipment as scoped.
Sort by length: short with short, long with long. Pick a rest height from the floor for each group — L2.
Measure the largest distance from the barrel to the back wall — L1. We add 5–10 mm clearance.
Measure the safe distance left and right of the barrel centre — together that is the barrel-centre spacing L3.
Measure the inside width and depth of the safe.
Which series to choose
FR
no scope, up to 60 mm between barrels
FD
no scope, up to 80 mm between barrels
FDO
scoped, L1 up to 90 mm, up to 80 mm between barrels
UGL
no scope, guns turned at 45°, 98 mm pitch
UGL_O
scoped, at 45°, plus a side and a straight end place
Custom sizes
anything else — the generator recalculates
What a good cradle does
Uses the safe space fully so more guns fit.
Keeps guns from scratching each other, the safe body and fittings.
Lasts, and does not absorb moisture or oil.
Is easy to use.
Mounting
Vinyl magnet
Budget option for a steel safe. The smaller the rest, the weaker the magnet.
Neodymium magnet 16 mm
Several times stronger than vinyl. Reliable in a steel safe.
Neodymium magnet 25 mm
Very strong — for safes with fabric lining.
Plastic clip
The plastic clip mounts to a wall, wood or chipboard (double-sided tape works), and the rest clamps into it.
Screw holes
Holes for screws — for a wooden cabinet or a wall.
Glue
The rest is glued to the safe body.
Good to know
Standard rest: 80.8 mm pitch, Ø24 mm barrel seat, 48 mm forend channel, 40 mm sheet.
Stock cradle: 248 mm deep (no scope) or 333 mm (with scope), 60 × 150 mm pocket.
Instead of a cradle you can choose egg-crate foam, a 10 mm PE strip or a 5 mm EVA strip.
Mounting: magnets or screws — mention it in the comment.